Windsor dune oak brushed & oiled
Engineered wood floor 189mm x 14mm x 1860mm
• 189mm wide, 14mm thick, 1,860mm long
• Single plank of oak, 3mm top layer
• Rustic character grade
• White oiled, brushed and UV oiled
• T&G to four sides, bevel edged
• 2.81m2 per pack
| £29.99 m2 £84.27 pack+VAT |
Windsor dune oak brushed & oiled is just one of the high quality Old distressed & aged collection offered by Source Wood Floors. This Oak wood flooring board is 189mm wide and 14mm thick with 1860mm length boards (up to 15% split lengths).
As a single plank engineered wood floor, this board is constructed from a 3 ply construction.
Engineered wood floors are constructed with a top hardwood layer plus a base layer. In this product the base material is Softwood and it benefits from a tongue and groove profile on all four sides of the plank. This high quality hardwood floor features a top wear layer of 3.0mm which can be sanded three times. However a hardwood floor that is cared for and well maintained should not need sanding for fifteen to twenty years or so. Each floorboard has a bevel edge detail (a V groove) which helps to emphasise the plank look of every floorboard.
The rustic grade of this oak wooden floor exudes a wealth of character and charm with natural markings, colour variations, mineral streaks, growth rings and a mix of closed and open knots.
This floor is produced from timber that has been sourced from a sustainable resource. To provide a natural finish to the floor that offers durability and which brings out the natural character and grain, this floor is pre-finished in a natural oil.
Before finishing this floor is wire brushed across the surface of the wood which removes softer timber in the grain and enhances it by producing a textured surface to the floor. Before the top surface finish is applied to the floor, the surface of the wood is colour stained with White colour stain. This flooring is suitable for use with Under Floor Heating systems. Please ask for specific details on installation recommendations. Windsor dune oak brushed & oiled can be installed by floating the flooring onto a suitable wood flooring underlay or it can be glued down with a flexible floor adhesive such as Sikabond. It is usually available 1-3 days and comes in a 2.81m2 pack.
If you need help or would like to order over the phone then please call us on 08456 021 781.
Brand name
Windsor dune oak brushed & oiled
Product ID
813
Species
Oak
Board width
189mm
Thickness
14mm
Length
1860mm
Length detail
up to 15% split lengths
Floor type
Engineered
Board construction
3 ply
Base material
Softwood
Profile
Tongue & Groove 4 sides
Top layer
3.0mm
Edge style
Bevel
Character grade
Rustic oak
Environmental
Sustainable resource
Finish
Natural oil
Surface texture
Brushed
Colour stain
White
Under floor heating
Yes
Installation methods
Glue or Float
Acclimatisation period
3 - 7 days
Normal lead time
1-3 days
Pack size
2.81m2 pack
