Get in touch: 0845 6021 781 or 0756 8077 907 out of hours
473
Burano Scandic White Brushed & Uv Oiled Hardwood Floor
SKU: {{ combination ? combination.sku : 'N/A' }} Loading
Price Calculator
Need advice? 0845 6021 781
Alternative: 01379 642 843 | Out of hours: 0756 8077 907
{{{ combination.content }}}
• Engineered oak floor with 4mm top layer
• Rustic grade
• White stain and brushed & oiled finish
• 14mm thick, 189mm wide, and 1,860mm long
• Guaranteed for 20 years
• Click fit, 2.81m2 per pack
The Burano oak flooring range is a charming selection of key colour stained and natural finished 14mm engineered oak floor boards. Burano rustic gradeis specially selected at the mill to offer a beautiful rustic floor with goodcolour variation and a decent amount character.
The Burano range has been chosen for its consistency of finish andunrivalled standard of milling. The brushed and oiled finish brings out the beautifulcharacter of an oak floor whilst leaving a natural finish to the touch. Also offeringexcellent protection and an easily maintainable finish. Source Wood Floors recommendthe use of the Bona cleaning and maintenance products to keep your floorlooking like new.
The Burano range of boards offer a beautifully machined substantial toplayer of oak comprising a high quality base layer, resulting in a 3 coreconstruction that gives excellent strength and dimensional stability.
Using the Source Wood 'floor calculator' along with ourrevolutionary wastage estimator you are sure to get the correct amount for yourproject. If you are unsure of anything please do not hesitate to contact one ofthe Source team members who will always be more than happy to help
| Specification | Value |
|---|---|
| {{ item.attribute }} | {{ item.value }} |
Our 14mm engineered floors can be installed by a floating method using a Source Wood Floors recommended wood flooring underlay, or can be stuck down using Sikabond adhesive products, this could be a full stick down method such as Sika 95, or a gunned on product such as Sika 52 woodfloor.
Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors immediately.
Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are stipulated in the Source Wood Floors fitting instructions.
Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will end up being fitted.
