Get in touch: 0845 6021 781 or 0756 8077 907 out of hours
3689
Colossus Wide Board Oak Unfinished Hardwood Flooring 260mm
SKU: {{ combination ? combination.sku : 'N/A' }} Loading
Price Calculator
Need advice? 0845 6021 781
Alternative: 01379 642 843 | Out of hours: 0756 8077 907
{{{ combination.content }}}
• 260mm wide plank
• Oak single plank with 6mm top layer
• Rustic grade
• Finish with oil or lacquer of your choice
• Muti ply base layer
• Tongue and groove to 4 sides and 2.86m2 per pack
The Colossus wide plank oak flooring range is a charming selection of key colour stained and natural finished 20mm engineered oak floor boards. Colossus wide plank unfinished boards are specially selected at the mill to offer a nice clean oak floor with good colour variation and consistency of nice character. The generous 260mm wide plank looks especially good in larger spaces.
This unfinished Colossus board has been chosen for its level of finish and unrivalled standard of milling. This makes the Colossus range not only easy to finish but also avery durable surface ready for your choice of oil or lacquer. Source Wood Floors strongly recommends using either the Osmo hardwax selection of colours or natural oils or the Bona range of lacquers.
The Colossus range of boards offer a substantial 6mm top layer of oak in a beautifully machined plank comprising a high quality base layer, resulting in a multiply construction that gives superior strength and dimensional stability. It comes in a 2.86 sq m pack.
Using theSource Wood Floors 'floor calculator' along with our revolutionary wastage estimator you are sure to get the correct amount for your project. If you are unsure of anything please do not hesitate to contact one of the Source Team members who will always be more than happy to help.
| Specification | Value |
|---|---|
| {{ item.attribute }} | {{ item.value }} |
Our 21mm engineered boards are ideal for secret nailing or installation by the full stick down, they can be floated on an underlay but the previously mentioned are Source Wood Floors preferred methods of installation.
Installation with the Sika professional wood flooring glue is recommended and ideal for use with underfloor heating installations.
Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors immediately.
Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are stipulated in the Source Wood Floors fitting instructions.
Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will end up being fitted.
