Our website uses cookies
Cookies are small files held on your computer which allow us to give you the best browsing experience possible. You can delete and block cookies but parts of our site will not work without them. By using our website you accept our use of cookies.
I’m happy with thisFind out more
Riviera Walnut Engineered Flooring Lacquered RL brand
+ Rollover images to enlarge

Riviera Walnut Engineered Flooring Lacquered RL

SKU: 1333

metres per pack: 2.640

Under 30m² £37.50
30m² + £36.93
60m² + £36.55
90m² + £35.51
Pack Qty:
£99.00 per pack (Exc. Vat)
Price Calculator

Wastage allowance

0% 20%

phone Need advice? 0845 6021 781 Alternative: 01379 642843 | Out of hours: 07568 077907
fb tt pin gp

• Engineered walnut floor with 3mm top layer
• Rustic grade
• Smooth lacquered finish
• 14mm thick, 150mm wide, and random length
• Guaranteed for 35 years
• Tongue and groove, 2.64m2 per pack
The Riviera walnut flooring range is a charming selection of key colour stained and natural finished 14/15mm engineered oak floor boards. Riviera rustic grade is specially selected at the mill to offer a beautiful rustic floor with good colour variation and a decent amount character.
The standard lacquered board in the Riviera range has been chosen for its consistency of finish and unrivaled standard of milling. The clear lacquered finish brings out the natural character of the walnut floor, whilst offering excellent protection and an easy to maintain finish. Source Wood Floors recommends the use of the Bona cleaning and maintenance products to keep your floor looking like new.
The Riviera range of boards offer a beautifully machined substantial top layer of oak comprising a high quality base layer, resulting in a 3 core construction that gives excellent strength and dimensional stability.
Using the Source Wood 'floor calculator' along with our revolutionary wastage estimator you are sure to get the correct amount for your project. If you are unsure of anything please do not hesitate to contact one of the Source team members who will always be more than happy to help

board constructionmulti-ply
board thickness14mm
character graderustic
edge stylebevel
floor finishMatt Lacquered
floor typeengineered plank
installation methodglue or float
profiletongue and groove 4 sides
surface texturesmooth
top layer3 mm

Our 14/15mm engineered floors can be installed by a floating method using one of Source wood floors underlays, or can be stuck down using Sikabond adhesive products, this could be a full stick down method such as Sika 95, or a gunned on product such as Sika 52 woodfloor.
Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors immediately. 
Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are stipulated in the fitting instructions. 
Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly prepared subfloor or job site environment deficiencies. When hardwood flooring is ordered, a 5 % allowance factor, depending on layout, must be added to the actual square footage amount needed, this will endure only the boards the owner deems fit will end up being fitted.