• Oak single plank with 6mm top layer
• Dimensions189 x 20 x 1900mm long
• Rustic grade oak
• Lacquered, stained and handscraped
• Bevelled on 4 sides
• Tongue and groove to four sides and 2.155m2 pack
The Burano oak flooring range is a charming selection of key colour stained and natural finished 21mm engineered oak floor boards. Burano distressed grade is specially selected at the mill to offer a beautiful rustic and distressed
floor with good colour variation and a decent amount character.
The handscraped, stained and lacquered board in the Burano range has
been chosen for its consistency of finish and unrivalled standard of milling.
The lacquered finish gives the wood a beautiful sheen bringing out the
character properties. The lacquered finish makes this Burano board
not only easy maintenance but also a hard wearing surface. The handscraping brings the board to life
with wonderful undulations across the floor. Source Wood Floors recommends the use of
the Bona maintenance products to keep your floor looking like new.
The Burano range of boards offer a substantial 6mm top layer of oak
in a beautifully machined plank comprising a high quality base layer, resulting
in a multiply construction that gives superior strength and dimensional
stability. It comes in a 2.155sq m pack.
Using the Sourcel Wood Floors 'floor calculator' along with our revolutionary
wastage estimator you are sure to get the correct amount for your project. If
you are unsure of anything please do not hesitate to contact one of the Source team members who will always be more than happy to help.
|board thickness||20mm |
|floor finish||Matt Lacquered|
|floor type||engineered plank|
|installation method||glue or float|
|profile||tongue and groove 4 sides|
|surface texture||hand scraped|
|top layer||6 mm|
Our 21mm engineered boards are ideal for secret nailing or installation by
the full stick down, they can be floated on an underlay but the previously
mentioned are Source Wood’s preferred methods of installation.
Installation with the Sika professional wood flooring glue is recommended
and ideal for use with underfloor heating installations.
Carefully examine the flooring for colour, finish and quality before
installing it. Use reasonable selectivity and hold out or cut off pieces with
glaring defects whatever the cause. If the flooring is not acceptable, contact
Source Wood Floors immediately.
Before beginning installation of any hardwood flooring product, the fitter
must determine that the environment of the job site and the condition and type
of the subfloor involved are acceptable, ensuring that it meets or exceeds all
requirements which are stipulated in the fitting
Source Wood Floors declines any responsibility for job failure resulting from or
associated with inappropriate or improperly prepared subfloor or job site
environment deficiencies. When hardwood flooring is ordered, a 5 %
allowance factor, depending on layout, must be added to the actual square
footage amount needed, this will endure only the boards the owner deems fit
will end up being fitted.