• Engineered oak floor with 3mm top layer
• Rustic grade
• Smoked, bandsawn and oiled finish
• 14mm thick, 189mm wide, and 1,860mm long
• Guaranteed for 20 years
• T&G, 2.81m2 per pack
The Burano oak flooring range is a charming selection of key colour stained and natural finished 14/15mm engineered oak floor boards. Burano rustic grade
is specially selected at the mill to offer a beautiful rustic floor with good
colour variation and a decent amount character.
The Burano range has been chosen for its consistency of finish and
unrivalled standard of milling. The bandsawn and oiled finish brings out the beautiful
character of an oak floor whilst leaving a natural finish to the touch. Also offering
excellent protection and an easily maintainable finish. Source Wood Floors recommend
the use of the Bona cleaning and maintenance products to keep your floor
looking like new.
The Burano range of boards offer a beautifully machined substantial top
layer of oak comprising a high quality base layer, resulting in a 3 core
construction that gives excellent strength and dimensional stability.
Using the Source Wood Floorsc'floor calculator' along with our
revolutionary wastage estimator you are sure to get the correct amount for your
project. If you are unsure of anything please do not hesitate to contact one of
the Source team members who will always be more than happy to help
Underfloor heating: Yes, if installed as a floating floor with an underlay that incorporates a DPM (maximum contact temp 27 degrees)
|board construction||3 ply|
|edge style||bevel 4 sides|
|floor type||engineered plank|
|installation method||glue or float|
|profile||T&G 4 sides|
|top layer||3 mm|
Our 14/15mm engineered floors can be installed by a floating method using a Source Wood Floors recommended wood floor underlay
, or can be stuck down using an oak flooring adhesive
, this could be a full stick down
method such as Sika 95, or a gunned on product such as Sika 52 woodfloor.
Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or
cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors
Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site
and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are
stipulated in the Source Wood Floors fitting instructions.
Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly
prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance
depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will
end up being fitted.