Our website uses cookies
Cookies are small files held on your computer which allow us to give you the best browsing experience possible. You can delete and block cookies but parts of our site will not work without them. By using our website you accept our use of cookies.
I’m happy with thisFind out more
Burano Dusky Sawn Oak Wood Floor
+ Rollover images to enlarge

Burano Dusky Sawn Oak Wood Floor

SKU: 1699

metres per pack: 2.810

Under 30m² £43.77
30m² + £40.78
60m² + £40.04
90m² + £39.44
Pack Qty:
£123.00 per pack (Exc. Vat)
Price Calculator

Wastage allowance

0% 20%

phone Need advice? 0845 6021 781 Alternative: 01379 642843 | Out of hours: 07568 077907
fb tt pin gp

• Engineered oak floor with 3mm top layer
• Rustic grade
• Smoked, bandsawn and oiled finish
• 14mm thick, 189mm wide, and 1,860mm long
• Guaranteed for 20 years
• T & G, 2.81m2 per pack
The Burano oak flooring range is a charming selection of key colour stained and natural finished 14/15mm engineered oak floor boards. Burano rustic grade is specially selected at the mill to offer a beautiful rustic floor with good colour variation and a decent amount character.
The Burano range has been chosen for its consistency of finish and unrivalled standard of milling. The bandsawn and oiled finish brings out the beautiful character of an oak floor whilst leaving a natural finish to the touch. Also offering excellent protection and an easily maintainable finish. Source Wood Floors recommend the use of the Bona cleaning and maintenance products to keep your floor looking like new.
The Burano range of boards offer a beautifully machined substantial top layer of oak comprising a high quality base layer, resulting in a 3 core construction that gives excellent strength and dimensional stability.
Using the Source Wood Floorsc'floor calculator' along with our revolutionary wastage estimator you are sure to get the correct amount for your project. If you are unsure of anything please do not hesitate to contact one of the Source team members who will always be more than happy to help
Underfloor heating: Yes, if installed as a floating floor with an underlay that incorporates a DPM (maximum contact temp 27 degrees)

board construction3 ply
board thickness14mm
character graderustic
edge stylebevel 4 sides
floor finishOiled
floor typeengineered plank
installation methodglue or float
profileT & G
surface texturebrushed
top layer3 mm

Our 14/15mm engineered floors can be installed by a floating method using a Source Wood Floors recommended wood floor underlay, or can be stuck down using an oak flooring adhesive, this could be a full stick down method such as Sika 95, or a gunned on product such as Sika 52 woodfloor.

Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors immediately.

Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are stipulated in the Source Wood Floors fitting instructions.

Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will end up being fitted.