• Parador Trendtime 8 flooring
• Engineered oak floor with 4mm top layer
• Rustic grade
• Smoked & oiled finish
• 15mm thick, 190mm wide, and 1,882mm long
• Click fit, 2.86m2 per pack
board construction | 3-ply |
board thickness | 15mm |
character grade | rustic |
edge style | bevel |
floor finish | oiled |
floor type | engineered plank |
installation method | glue or float |
profile | click-fit |
shade | medium |
species | oak |
surface texture | brushed |
top layer | 4 mm |
Our 14/15mm engineered floors can be installed by a floating method using a Source Wood Floors recommended
flooring underlay, or can be stuck down using
Sikabond adhesive products, this could be a full stick down
method such as Sika 95, or a gunned on product such as Sika 52 woodfloor.
Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or
cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors
immediately.
Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site
and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are
stipulated in the Source Wood Floors fitting instructions.
Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly
prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance
depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will
end up being fitted.