• Engineered, distressed & oiled wood floor
• Rustic character grade
• Distressed, and antiqued finish
• 6mm top layer of oak
• Dimensions 20 x 189 x 1860mm
• T&G to four sides, 2.11m2 pack
The Torcello oak flooring range is a charming selection of key colour stained and
natural finished 20mm engineered oak floor boards. Torcello rustic and distressed
is specially selected at the mill to offer a distressed oak plank ready for you
to colour and finish after being laid
The Torcello range has been chosen for its consistency of finish and unrivalled standard
of milling. This makes the Torcello range not only easy maintenance but also
a very durable surface ready for your choice of finish.
Torcello range of boards offer a substantial 6mm top layer of oak in a
beautifully machined plank comprising a high quality base layer, resulting in a
multiply construction that gives superior strength and dimensional stability.
It comes in a 2.11 sq m pack.
Source Wood Floors 'floor calculator' along with our revolutionary wastage estimator
you are sure to get the correct amount for your project. If you are unsure of
anything please do not hesitate to contact one of the Source Team members
who will always be more than happy to help.
|board thickness||20mm |
|floor type||engineered plank|
|profile||tongue and groove 4 sides|
|top layer||6 mm|
Our 20mm engineered boards are ideal for secret nailing or installation by the full stick down, they can be floated on an underlay but the previously mentioned are Source Wood Floors preferred methods of installation.
Installation with a professional
Sikabond flooring adhesive
is recommended and ideal for use with underfloor heating installations.
Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors immediately.
Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are stipulated in the Source Wood Floors fitting instructions.
Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will end up being fitted.