• Parador Classic 3060 flooring
• Engineered oak floor with 4mm top layer
• Rustic grade
• White & oiled finish
• 13mm thick, 185mm wide, and 2200mm long
• Click fit, 3.663m2 per pack
|floor type||engineered plank|
|installation method||glue or float|
|top layer||4 mm|
Our 14/15mm engineered floors can be installed by a floating method using a Source Wood Floors recommended flooring underlay
, or can be stuck down using Sikabond adhesive
products, this could be a full stick down
method such as Sika 95, or a gunned on product such as Sika 52 woodfloor.
Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or
cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors
Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site
and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are
stipulated in the Source Wood Floors fitting instructions.
Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly
prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance
depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will
end up being fitted.