Our website uses cookies
Cookies are small files held on your computer which allow us to give you the best browsing experience possible. You can delete and block cookies but parts of our site will not work without them. By using our website you accept our use of cookies.
I’m happy with thisFind out more
Parador Classic 3060 Brushed Oak Lacquered - 1368979 brand
+ Rollover images to enlarge

Parador Classic 3060 Brushed Oak Lacquered - 1368979

SKU: 2121

metres per pack: 3.660

All Areas £42.55
Pack Qty:
£155.73 per pack (Exc. Vat)
Price Calculator

Wastage allowance

0% 20%

phone Need advice? 0845 6021 781 Alternative: 01379 642843 | Out of hours: 07568 077907
fb tt pin gp

• Parador Classic 3060 flooring
• Engineered oak floor with 4mm top layer 
• Rustic grade 
• Brushed & lacquered finish 
• 13mm thick, 185mm wide, and 2200mm long 
• Click fit, 3.663m2 per pack

board construction3-ply
board thickness15mm
character graderustic
edge stylebevel
floor finishoiled
floor typeengineered plank
installation methodglue or float
surface texturebrushed
top layer4 mm

Our 14/15mm engineered floors can be installed by a floating method using a Source Wood Floors recommended flooring underlay, or can be stuck down using Sikabond adhesive products, this could be a full stick down method such as Sika 95, or a gunned on product such as Sika 52 woodfloor.

Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors immediately.

Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are stipulated in the Source Wood Floors fitting instructions.

Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will end up being fitted.