Our website uses cookies
Cookies are small files held on your computer which allow us to give you the best browsing experience possible. You can delete and block cookies but parts of our site will not work without them. By using our website you accept our use of cookies.
I’m happy with thisFind out more
Metropolitan Oak Kiln Smoked
+ Rollover images to enlarge

Metropolitan Oak Kiln Smoked

SKU: 2602

metres per pack: 2.170

Under 20m² £31.94
20m² + £28.99
50m² + £25.73
90m² + £23.94
Pack Qty:
£69.31 per pack (Exc. Vat)
Price Calculator

Wastage allowance

0% 20%

phone Need advice? 0845 6021 781 Alternative: 01379 642843 | Out of hours: 07568 077907
fb tt pin gp

• Single plank of oak, 4mm top layer
• Rustic character grade
• Wood lye, colour oil, and UV cured oiled
• Stained, Brushed & UV Oiled
• Long board lengths of 1900mm
• 35 year guarantee
• T&G to four sides, 2.166m2 pack
• Suitable for underfloor heating


Our 15mm engineered boards are ideal for secret nailing or installation by the full stick down, they can be floated on an underlay but the previously mentioned are Source Wood Floors preferred methods of installation. 

Installation with the Sika professional wood flooring glue is recommended and ideal for use with underfloor heating installations.

Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors immediately. 

Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are stipulated in the Source Wood Floors fitting instructions. 

Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will end up being fitted.