• Single plank of oak 260mm extra wide
• 4mm top layer on multi-ply base
• Rustic grade oak
• Finished with natural UV oil
• Toungue and groove to 4 sides, 1.976m2 pack
The Colossus Wide oak flooring range is a charming selection of key colour stained and natural 20mm engineered oak floor boards. Colossus wood flooring also
utilises some wonderful application of distressing so you are sure to
character and colour to suit your needs.
The Colossus wide board range is a colossal single plank selection in a rustic character grade of oak, the range is available in sizes from 220 -
300mm in width and can be supplied in lengths of up to 2200mm. This board has many applications but looks particularly good in big open spaces.
The UV hardwax oils used in the finishing of our Colossus range has been
chosen for its depth of colour and unrivalled protection. This makes the
Colossus range not only easy maintenance but also a very durable surface to have in home or
business for life.
The Colossus range of boards offer a substantial 6mm top layer of oak
in a beautifully machined plank comprising a high quality base layer, resulting
in a multiply construction that gives superior strength and dimensional
stability. It comes in a 1.976 sq m pack.
Using the Source Wood Floors 'floor calculator' along with our revolutionary wastage
estimator you are sure to get the correct amount for your project. If you are
unsure of anything please do not hesitate to contact one of the Source
Team members who will always be more than happy to help.
|board thickness||20mm |
|floor type||engineered plank|
|profile||tongue and groove 4 sides|
|top layer||4 mm|
Our 21mm engineered boards are ideal for secret nailing or installation by the full stick down, they can be floated on an underlay but the previously mentioned are Source Wood Floors preferred methods of installation.
Installation with a elastic
Sika floor adhesive
is recommended and ideal for use with underfloor heating installations.
Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors immediately.
Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are stipulated in the Source Wood Floors fitting instructions.
Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will end up being fitted.