For friendly advice call
0845 6021 781
or 07568 077907 out of hours
0845 6021 781
or 07568 077907 out of hours
0845 6021 781
01379 642843
or 07568 077907 out of hours
07568 077907
SEARCH
+ Rollover images to enlarge
V4 Urban Nature UN102 Oak Rustic 'Wharf Grey', Hand Finished, Stained & UV Oiled
SKU: 4060
metres per pack: 2.170
Need advice?
0845 6021 781
Alternative: 01379 642843 |
Out of hours: 07568 077907
• V4 Urban Nature Range
• Board size: 190 x 15 x 1900 mm
• Finish:3 coats of UV cured Natural oil
• 4mm Oak wear layer with hardwood multi-ply base with tongue and grooved profile.
• Pack contents 2.166m2 with 6 boards including 25% random cut.
• 35 year guarantee
• 4mm CD grade rustic oak with a micro bevelled edge on 4 sides.
• Can be installed as floated or fully bonded. Suitable for underfloor heating
Price beater - we'll beat any price
Please email or call - BEST Price guaranteed
The surface of this board is given various treatments including cross sawing and hand scraping with traditional tools, the timber is selected for it character filled knots and natural blemished which are filled and and then sanded individually to leave open knots and holes which give the appearance of an aged and weathered plank. The Foundry Steel top layer is given a deep lustre with the application of different colour oils which are UV cured to build up a natural protective surface.
This floor is finished with coats of natural UV oil which keeps the hardwood surface protected from stains and wear whilst maintaining a natural look and feel.
This floor is FSC® 100% certified. All V4 Wood flooring is milled from responsibly sourced timber meeting all European Timber regulations.
• Board size: 190 x 15 x 1900 mm
• Finish:3 coats of UV cured Natural oil
• 4mm Oak wear layer with hardwood multi-ply base with tongue and grooved profile.
• Pack contents 2.166m2 with 6 boards including 25% random cut.
• 35 year guarantee
• 4mm CD grade rustic oak with a micro bevelled edge on 4 sides.
• Can be installed as floated or fully bonded. Suitable for underfloor heating
Price beater - we'll beat any price
Please email or call - BEST Price guaranteed
The surface of this board is given various treatments including cross sawing and hand scraping with traditional tools, the timber is selected for it character filled knots and natural blemished which are filled and and then sanded individually to leave open knots and holes which give the appearance of an aged and weathered plank. The Foundry Steel top layer is given a deep lustre with the application of different colour oils which are UV cured to build up a natural protective surface.
This floor is finished with coats of natural UV oil which keeps the hardwood surface protected from stains and wear whilst maintaining a natural look and feel.
This floor is FSC® 100% certified. All V4 Wood flooring is milled from responsibly sourced timber meeting all European Timber regulations.
-
Our 15mm engineered boards are ideal for secret nailing or installation by the full stick down, they can be floated on an underlay but the previously mentioned are Source Wood Floors preferred methods of installation.
Installation with the Sika professional wood flooring glue is recommended and ideal for use with underfloor heating installations.
Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors immediately.
Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are stipulated in the Source Wood Floors fitting instructions.
Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will end up being fitted.
Installation with the Sika professional wood flooring glue is recommended and ideal for use with underfloor heating installations.
Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors immediately.
Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are stipulated in the Source Wood Floors fitting instructions.
Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will end up being fitted.
Related Products
