Our website uses cookies
Cookies are small files held on your computer which allow us to give you the best browsing experience possible. You can delete and block cookies but parts of our site will not work without them. By using our website you accept our use of cookies.
I’m happy with thisFind out more
V4 Alpine Lock AL103 Fjordic Shore Brushed Grey Stained & Matt Lacquered brand
+ Rollover images to enlarge

V4 Alpine Lock AL103 Fjordic Shore Brushed Grey Stained & Matt Lacquered

SKU: 4084

metres per pack: 2.770

PRICE ON APPLICATION

phone Need advice? 0845 6021 781 Alternative: 01379 642843 | Out of hours: 07568 077907
fb tt pin gp

• Board Size: 180 x 14/2.5 x 2200 mm 
• 2.5 mm CD grade rustic oak with micro bevelled edge on 4 sides 
• Finish: Up to 5 coats of water based UV cured lacquer
• 3 ply Engineered hardwood board with 5Gc Locking profile 
• Guaranteed for 35 years, suitable with under floor heating
• Pack Contents: 2.77m2 with 7 boards which may contain 1 split length.

Price beater - we'll beat any price
Please email or call - BEST Price guaranteed

European oak is lightly brushed to enhance the rustic grain and sealed with a water based natural lacquer. The micro bevelled oak top layer is precision milled and packed on to a 5GC glueless locking system for a simple and versatile installation.  All V4 Wood flooring is milled from responsibly sourced timber meeting all European Timber regulations.  This floor is finished with low maintenance lacquer which keeps the surface protected from stains and wear. Furniture should be protected with pads and the floor should be kept dust free

board construction3-ply
board thickness14mm
character graderustic
edge stylebevel
floor finishlacquered
floor typeengineered plank
installation methodglue or float
profileclick-fit
shadelight-natural
species   oak
surface texturebrushed
top layer3 mm

Our 14/15mm engineered floors can be installed by a floating method using a Source Wood Floors recommended wood flooring underlay, or can be stuck down using Sikabond adhesive products, this could be a full stick down method such as Sika 95, or a gunned on product such as Sika 52 woodfloor.

Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors immediately.

Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are stipulated in the Source Wood Floors fitting instructions.

Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will end up being fitted.