Our website uses cookies
Cookies are small files held on your computer which allow us to give you the best browsing experience possible. You can delete and block cookies but parts of our site will not work without them. By using our website you accept our use of cookies.
I’m happy with thisFind out more
Developer Oak Prime Grade Oiled - 14 x 190 x 1900mm
brand
+ Rollover images to enlarge

Developer Oak Prime Grade Oiled - 14 x 190 x 1900mm

SKU: 1607

metres per pack: 2.890

Under 25m² £37.47
25m² + £36.04
50m² + £35.18
90m² + £33.45
Pack Qty:
£108.30 per pack (Exc. Vat)
Price Calculator
Area

Wastage allowance

0% 20%
CALCULATE PRICE

phone Need advice? 0845 6021 781 Alternative: 01379 642843 | Out of hours: 07568 077907
fb tt pin gp

• Engineered oak floor with 3mm top layer 
• Prime grade 
• Oiled 
• 14mm thick, 190mm wide, and 1,900mm long 
• Guaranteed for 20 years 
• Tongue and groove, 2.88m2 per pack 

The Developer oak flooring range is a charming selection of key colour stained and natural finished 14/15mm engineered oak floor boards. The Developer range has been chosen for its consistency of finish and unrivalled standard of milling. The oiled finish brings out the beautiful character of an oak floor whilst leaving a natural finish to the touch. Also offering excellent protection and an easily maintainable finish. Source Wood Floors recommend the use of the Bona cleaning and maintenance products to keep your floor looking like new.
The Developer range of boards offer a beautifully machined substantial top layer of oak comprising a high quality base layer, resulting in a 3 core construction that gives excellent strength and dimensional stability.
Using the Source Wood Floors 'floor calculator' along with our revolutionary wastage estimator you are sure to get the correct amount for your project. If you are unsure of anything please do not hesitate to contact one of the Source team members who will always be more than happy to help.

board construction3 ply
board thickness14mm
character gradePrime
edge stylebevel
floor finishOiled
floor typeengineered plank
installation methodglue or float
profiletongue and groove 4 sides
shadelight-natural
speciesoak
surface texturesmooth
top layer3 mm

Installation with a professional Sika adhesive is recommended and ideal for use with underfloor heating installations.

Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors immediately. 

Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are stipulated in the Source Wood Floors fitting instructions. 

Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will end up being fitted.