• Board Size: 180 x 14/2.5 x 2200 mm
• 2.5 mm CD grade rustic oak with micro bevelled edge on 4 sides
• Finish: Up to 5 coats of water based UV cured lacquer
• 3 ply Engineered hardwood board with 5Gc Locking profile
• Guaranteed for 35 years, suitable with under floor heating
• Pack Contents: 2.77m2 with 7 boards which may contain 1 split length.Price beater - we'll beat any price Please email or call - BEST Price guaranteed
European oak is lightly brushed to enhance the rustic grain and sealed with a water based natural lacquer. The micro bevelled oak top layer is precision milled and packed on to a 5GC glueless locking system for a simple and versatile installation. All V4 Wood flooring is milled from responsibly sourced timber meeting all European Timber regulations. This floor is finished with low maintenance lacquer which keeps the surface protected from stains and wear. Furniture should be protected with pads and the floor should be kept dust free
|floor type||engineered plank|
|installation method||glue or float|
|top layer||3 mm|
Our 14/15mm engineered floors can be installed by a floating method using a Source Wood Floors recommended wood flooring underlay
, or can be stuck down using Sikabond adhesive products
, this could be a full stick down
method such as Sika 95, or a gunned on product such as Sika 52 woodfloor.
Carefully examine the flooring for colour, finish and quality before installing it. Use reasonable selectivity and hold out or
cut off pieces with glaring defects whatever the cause. If the flooring is not acceptable, contact Source Wood Floors
Before beginning installation of any hardwood flooring product, the fitter must determine that the environment of the job site
and the condition and type of the subfloor involved are acceptable, ensuring that it meets or exceeds all requirements which are
stipulated in the Source Wood Floors fitting instructions.
Source Wood Floors declines any responsibility for job failure resulting from or associated with inappropriate or improperly
prepared subfloor or job site environment deficiencies. When ordering hardwood flooring allow for a 5% to 10% wastage allowance
depending on layout which must be added to the total square meterage. This will endure only the boards the owner deems fit will
end up being fitted.